How do i fix a gas in oil pan problem?

Ok i have a 1988 chevy s10 pickup truck there is a problem with it the problem is the gas is geting into the oil pan when i read the oil stick it is way off the full mark the engine seems to run fine and it does have a little smoke to the end of the pipe when running i was lso wondering if i could fix that problem of if i have to get a hole new motor thanks for your help...How do i fix a gas in oil pan problem?
if its got a manuel fuel pump, the diafram is busted in it and the gas and oil is mixing. if its fuel injected, the fuel pump regulator is bad and letting too much pressure into the injectors and running into the oil.How do i fix a gas in oil pan problem?
the problem is a fuel issue. is this engine Carburated? have you an electric fuel pump added? some minor fuel dillusion is normal on carburated motors not much but a tiny bit thats why oil usually needs changed at certain intervals, but eniugh to raise the dipstick level is only two posibilities fuel running out the carb floatbowls and into the cylinders, thias would cause very bad running lots of stalling or not starting due to hydraulic lock up. the other possible reason is you have amechanical fuel pump on the side of the block and the diaphram inside has blown a hole and is pumping it (fuel) into the block. this wont clearly be recognised except by lots of raw gas in the oil pan and a slight running performance condition.
Bad fuel injector or fuel pressure regulator.Have it checked at a shop before you ruin your engine.It will run fine right up untill the second it locks up.